Customer opinions

Dear WALCOM USA LLC,

My name is Mark Abate owner of Sound Choice Audio & Performance (SCAP). SCAP installed the TD3 into our down draft paint booth about 2 months ago. The very first time we used the TD3 we could notice a difference in the way the paint was getting sprayed out. We have found that when using the TD3 there is less time needed on the wet sand and buffing, because the clean and heated air coming out of the Walcom TD3 allows the paint to flow out much better then untreated air. At SCAP we pride ourselves on perfection; with every part we spray we can see the difference the TD3 makes. Our primers are now so flat that we can start sanding with 320, saving us time. And time is money! You can really see a difference in the all the materials we spray as for how the Walcom TD3 helps in adding a perfect job. You may have seen our latest car we built; it is the 2010 SCAP Heritage CAMARO. We debut it at the 2009 SEMA show, Where it was recognized as the #1 2010 CAMARO (http://www.examiner.com/x-23886-Portland-Tuner-Car-Examiner~y2009m11d7-SEMA-SHOW-2009-Top-Ten-2010-Camaros)( .http://www.urbanracer.com/articles/anmviewer.asp?a=4061&z=1). We at SCAP are believers in the ability of the TD3 to help deliver the best results that’s why we use it. You can see some of our other works at WWW.SCAPUSA.com . Looking forward to the future! Thank you WALCOM for developing the TD3 it’s been a pleasure to use such a product that makes a difference.

Your, Fan Mark Abate

From: Dennis Johnson [mailto:
  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 ] 
Sent: Monday, March 09, 2009 12:12 PM
To: 
  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
 
Subject: td3 reccomendation
 
Freedom Lincoln Mercury
Collision Repair Center
1712 Hearthside Court East
Chesapeake, VA 23325
Ph. 757-413-9130           
Fax 757-413-9231

3/9/2008

Dear Joe,

I can not tell you how nice it was to see you in Las Vegas at the 
Nace Show after all this time. 
The TD3 drying unit is unbelievable. We basically have no flash 
time in between basecoat or clear coat. 
It is almost impossible to run clear coat it just hangs where you put it. 
We do not ever have a redo for fisheyes or any other air line 
containment issues. 
The metallic layout is outstanding and I have not seen any jobs with 
striping or mottling issues. 
Our shop has spent over $ 90,000 from vendors at the Nace Show 
and the TD3 is the best purchase we made. 
I would highly recommend this unit to any paint booth no matter whether 
they have paint issues or not just based upon the increased production 
the unit has allowed us to run thru our booth. 
Once again thanks very much the TD3 has made our shop more profitable.

Dennis T. Johnson
Body Shop Manager